Learn How to License vCenter, ESXi and vSAN

I’ve written a number of posts on how to install ESXi, vCenter and similar products but if memory serves me right, I don’t recall explaining in any detail how to apply license keys after you’re done installing. From a recently held conversation, I learned that licensing VMware products can be a tad confusing to some.

In today’s post, I go through the process of licensing the most frequently deployed VMware products these being ESXi and vCenter Server along with features such as vSAN. There are several options you can use to manage license keys; GUI, command line tools and PowerCLI. Let’s have a look.

 

How to license a standalone ESXi host

---

There are two ways to apply license keys on ESXi. You can either use the host client or run the vim-cmd shell command. The host must not be managed by vCenter Server – hence the term standalone – when using these methods.

Method 1: Using the host client

As always, navigate to https://<ESXi IP address> and log in as root. Click on Manage and select the Licensing tab.

 

Click on the Assign license button and type in the designated license key. Click on Check License to verify the key. If it is valid, press Assign License once more to apply it.

 

If for any reason you need to remove a license, you can do so by clicking on the Remove License button. Since there can only be one license assigned at any time, the last one entered is picked up by default.

 

Method 2: Running vim-cmd from shell

You first need to enable shell on ESXi using either the DCUI or the host client. Once you that, SSH to the ESXi host and log in as root. Run the following command:

vim-cmd vimsvc/license --set=L133G-UTGBF-7G344-04444-XFDGB

Note: The key used in the above line is not valid.

If the command is successful, the output will show which features have been unlocked following the key’s assignment along with product expiry details (if applicable), the type of key applied as well as the number of instances supported (per physical processor).

 

To check which license key is currently applied,  run the following.

vim-cmd vimsvc/license --show | grep 'serial' -w

The output is piped into grep so that only the product key is listed. Removing will list all the information associated with the key as per the previous screenshot.

 

How to license vCenter Server and managed ESXi

---

The vSphere Web client is the recommended method to use when you’re licensing vCenter Server. This applies to both the Windows and appliance versions. You will need to license vCenter itself and, optionally, any ESXi hosts it is managing. A separate license is required for vCenter. If the managed ESXi hosts have already been licensed, you can simply stick with the currently assigned license when adding hosts to vCenter Server as shown in Fig. 5. If on the other hand, the features unlocked by the current key do not suffice, you will need to replace the current key with a new one that does.

 

Step 1 – Adding license keys

Adding license keys to vCenter is the first step. In general, you’ll have 2 keys, one for vCenter and a second one for the ESXi hypervisors. After you load vSphere Web client, click on Licensing from the Home screen.

 

Select the Licenses tab on the Licenses screen and click on the green arrow button to add the new license keys.

 

Enter every key on its own line. As can be seen in Fig.8, I’ve added 3 license keys for vCenter Server, ESXi Enterprise Plus and vSAN Advanced. The keys are obfuscated for obvious reasons!

 

On the next screen, you can name the license keys. This makes it easier to identify which key is being assigned to what. This screen also provides details about the product expiry and capacity relevant to each key.

 

Press Finish on the last screen (not shown) and then verify that the new keys have in fact been added. The new keys should be listed alongside the previous ones.

 

Step 2 – Assigning license keys

After the keys have been added, we can go ahead and use them to license the corresponding VMware products. The Products tab gives you an overview of the products you can license, with all the license keys grouped accordingly. You can also view the features unlocked by the currently assigned key for the specific product by right-clicking on the product name and selecting View Features.

 

To license a product, switch to the Assets tab. Under the 4 additional tabs – vCenter Server systems, Hosts, Clusters, and Solution – you will find the respective products including one or more vCenter instances and managed ESXi hosts. The Clusters tab is there to license cluster-centric features such as vSAN. The Solutions tab is instead used to license products such as NSX.

 

Step 2a – Licensing vCenter Server

To license vCenter Server, switch to the vCenter Server systems tab and right click on the vCenter Server name listed under the Asset column selecting Assign License as you do.

 

Select the license key you wish to assign to vCenter Server and press OK. This is where the license names, previously mentioned, come in handy.

 

Step 2b – Licensing ESXi

Likewise, you can easily license one or multiple ESXi hosts by way of the Hosts tab. You can license hosts individually using different licenses or, as is generally the case, simply select all the hosts (Ctrl-A) and enter a common license. To do this, just right-click on the selection made and select Assign License. Again, select the required license from the list and press OK.

 

How to license vSAN

---

Some vCenter and/or ESXi features require a separate license key. Virtual San (vSAN) is one such example. Since this is a cluster-centric feature, you can either license vSAN using the Clusters tab on the Licenses page or directly from the cluster’s context menu.

 

The other method you can use to license vSAN is to right-click on the cluster name while in Hosts and Clusters view selecting Assign License as you do.

 

Using PowerCLI to add license keys

---

No post would be complete without mentioning PowerCLI. Yep,  you can query and add license keys to vCenter using PowerCLI.

First, launch a PowerCLI instance. Make sure you are connected only to the vCenter Server you want to query or make changes to. If in doubt, run Disconnect-VIServer * -Confirm:$false first. As always, use Connect-VIServer to connect to vCenter Server.

Task 1 – List existing license keys on vCenter:

$licMan = get-view $defaultviserver
$licInfo = get-view $licm.content.LicenseManager
$licInfo.Licenses

 

Task 2 – Add a license key to vCenter Server

Run the following to add a key to vCenter Server.

$licInfo.AddLicense("XXXXX-XXXXX-XXXXX-XXXXX-XXXXX",$null)

 

Conclusion

---

Here are a few references on the subject matter in addition to the information presented in this and other posts you’ll find on our VMware Blog.

• Licensing ESXi 6.x and vCenter Server 6.x
• Licensing NSX for vSphere 6.x
  
• Solution Licensing
  
• Adding License Keys to vCenter with PowerCLI
  
• VMware Licensing Help Center
• A quick look at VMware vSphere Editions and Licensing

[the_ad id=”4738″][the_ad id=”4796″]